_____________________________________ |Product |Rufco- |Rufco- | |Name |EX20 |EX30 | |________________|_________|__________| |Polymer |CX |CX | |Type |(HD/VL/ |(HD/VL/HD)| | | HD) | | |________________|_________|__________| |Roll Width |[A] |[B] | |Roll Length | | | | m(ft) | | | |________________|_________|__________| |Thickness |.5 (20) |.75 (30) | |ASTM D751 | | | |mm(mils) | | | |________________|_________|__________| |Density |HD 0.94 |HD 0.94 | |ASTM D1505 |VL 0.91 |VL 0.91 | |________________|_________|__________| |Tensile Strength| | | |ASTM D638 | | | |kN/m(lb/in) | | | | | | | |Yield |4.9 (28) |8.4 (48) | |Elongation % |10 |15 | | | | | |Break |14 (80) |22 (128) | |Elongation% |800 |800 | | | | | |________________|_________|__________| |Puncture |.13 (30) |.19 (42) | |Resistence | | | |FTMS 101C | | | |Method 2065 | | | |kN (lbs) | | | |________________|_________|__________| |Tear Resistence |.04 (10) |0.8 (17) | |ASTM D1004 | | | | kN (lbs) | | | |________________|_________|__________| |Low Temp.Brittle|-70 (-94)|-70 (-94) | |ASTM D746 C(F) | | | |________________|_________|__________| |Seam Strength | | | |ASTM D 4437 | | | |kN/m (lbs/in) | | | |Shear- Fusion |5.4 (31) |7.2 (41) | | | | | |Shear- Extrusion|NA |NA | |________________|_________|__________| |Peel- Fusion |4.5 (26) |6.8 (39) | | | | | |Peel- Extrusion |NA |NA | |________________|_________|__________| |Carbon Black |2.5 |2.5 | |ASTM D 1603 (%) | | | |________________|_________|__________| |Envir. Stress |200 |200 | |Crack Resist. | | | |ASTM 5397 Hours | | | |________________|_________|__________| |Manufact. |CL,LC,DP,|CL,LC,DP, | |Suggested |RP,DL,TL,|RP,DL,TL, | |Applications |SIL,LPL, |SIL,LPL, | | |SIC |SIC | |________________|_________|__________|