___________________________________________________________ |Product |Polypro- |Hypalon |Hypalon |Hypalon | |Name |pylene | | | | |________________|_________|__________|__________|__________| |Polymer Type |PP |CSPE |CSPE |CSPE | |________________|_________|__________|__________|__________| |Maximum | 2 | 2 | 2 | 2 | |Panel Size |2300m |1800m |1800m |1800 | | |(25000 |(20000 |(20000 |(20000 | | | 2 | 2 | 2 | 2 | | | ft ) | ft ) | ft ) | ft ) | |________________|_________|__________|__________|__________| |Thickness |1.14mm |0.9mm |1.14mm |1.5mm | |ASTM D 751 |(45 mils)|(36 mils) |(45 mils) |(60 mils) | |________________|_________|__________|__________|__________| |Specific |0.92 to |1.47 |1.47 |1.47 | |Gravity ASTM |0.96 | | | | |D 792 | | | | | |________________|_________|__________|__________|__________| |Ply Adhesion |3.5kN/m |1.4kN/m |1.4kN/m |1.4kN/m | |ASTM D 792 |(20 lbs/ |(8 lbs/ |(8 lbs/ |(8 lbs/ | | | in) | in) | in) | in) | |________________|_________|__________|__________|__________| |Dimensional |1% |2% |2% |2% | |Stability | | | | | |ASTM D 1204 | | | | | |________________|_________|__________|__________|__________| |Tensile Strength|1.1kN |0.89kN |1.1kN |1.3kN | |ASTM D 751 |(250 lbf)|(200 lbf) |(250 lbf) |(300 lbf) | | |22% |15% |15% |15% | |Procedure A | | | | | |________________|_________|__________|__________|__________| |Puncture |0.93kN |0.89kN |1.0kN |1.12kN | |Resistance |(210 lbf)|(200 lbf) |(200 lbf) |(200 lbf) | |FTMS 101 | | | | | |Method 2031 | | | | | |________________|_________|__________|__________|__________| |Tear Resistence |0.24kN |0.36kN |0.40kN |0.44kN | |ASTM D 751 |(55 lbf) |(80) |(90 lbf) |(100 lbf) | |Method B | | | | | |Tongue Tear | | | | | |________________|_________|__________|__________|__________| |Low Temp.Brittle|-40 |-40 |-40 |-40 | |ASTM D 2136 | | | | | |C (F) | | | | | |________________|_________|__________|__________|__________| |Seam Strength | | | | | | | | | | | |Shear |0.89kN |0.71kN |0.89kN |1.07kN | |ASTM D 751 |(200 lbf)|(160 lbf) |(200 lbf) |(240 lbf) | | | | | | | |Peel |3.5kN/m |1.75kN/m |1.75kN/m |1.75kN/m | |ASTM D 413 |(20 lbf/ |(10 lbf/ |(10 lbf/ |(10 lbf/ | | | in) | in) | in) | in) | |________________|_________|__________|__________|__________| |Resistance to |85 |80 |80 |80 | |Soil Burial | | | | | |ASTM D 3083 | | | | | |________________|_________|__________|__________|__________| |Hydrostatic |1.7HPa |1.7HPa |1.7HPa |1.7HPa | |Resistance |(250 psi)|(250 psi) |(250 psi) |(250 psi) | |ASTM D 751 | | | | | |________________|_________|__________|__________|__________| |Manufact. |CL, SIL, |CL, SIL, |CL, SIL, |CL, SIL, | |Suggested |SIC, LL, |SIC, LL, |SIC, LL, |SIC, LL, | |Applications |LC, TL, |LC, TL, |LC, TL, |LC, TL, | | |DL, LPL |DL, LPL |DL, LPL |DL, LPL | |________________|_________|__________|__________|__________|