LINQ Industrial Fabrics - Drainage Products (WALL DRAINS)

___________________________________
|Product         |Battle    |Battle    |
|Name            |Drain I   |Drain II  |
|________________|__________|__________|
|Structure       |Single    |Single    |
|                |Dimpled   |Dimpled   |
|                |Core      |Core      |
|________________|__________|__________|
|Core/Net/Mesh   |    PS    |    PS    |
|Polymer         |          |          |
|Composition     |          |          |
|________________|__________|__________|
|Geotextile      |    Y     |     Y    |
|Attached (Y/N)  |          |          |
|________________|__________|__________|
|Dimen.Properties|          |          |
|                |          |          |
|Width/Length    |          |          |
|m/(ft)          |(4/104)   |(4/104)   |
|                |          |          |
|Thickness       |          |          |
|Core/Net/Mesh   |          |          |
|ASTM D5199      |(250)     |  (437.5) |
|mm(mils)        |          |          |
|________________|__________|__________|
|Compressive     |          |          |
|strength @ yield|          |          |
|per ASTM D1621  |(75 Typ.) |(104 Typ.)|
|kPa(psi)        |          |          |
|________________|__________|__________|
|In Plane Flow Rt|          |          |
|ASTM D4716-87   |          |          |
|                |          |          |
|Gradient = 0.1  |          |          |
|Pressure=37.9kPa|          |          |
|(5.5psi)        |          |          |
|                |          |          |
|M2/S(gal/min/ft)|    NP    |     NP   |
|________________|__________|__________|
|In Plane Flow Rt|          |          |
|ASTM D4716-87   |          |          |
|                |          |          |
|Gradient = 1.0  |          |          |
|Pressure =100kPa|          |          |
|(14.5 psi)      |          |          |
|                | (9 Typ.) | (16 Typ.)|
|M2/S(gal/min/ft)|          |          |
|________________|__________|__________|