______________________________________________ |Product |Drain Away|Drain Away|Drain Away| |Name |I,II,III | IV a | IV b | |________________|__________|__________|__________| |Structure |Double |Double |Double | | |Cuspated |Cuspated |Cuspated | | |Core |Core |Core | |________________|__________|__________|__________| |Core/Net/Mesh | | | | |Polymer | HIPS | HIPS | HIPS | |Composition | | | | |________________|__________|__________|__________| |Geotextile | NW 4 oz | NW 4 oz | NW 4 oz | |Attached (Y/N) | PES/PP | PES/PP | PES/PP | |________________|__________|__________|__________| |Dimen.Properties| | | | | |1.5/3-16 |0.15/07 | 0.15/0.7 | |Width/Length |(5/10-50) |(0.5/50) |(0.5/50) | |m/(ft) | | | | | | | | | |Thickness | | | | |Core/Net/Mesh | 16(625) |16(625) |16(625) | |ASTM D5199 | | | | |mm(mils) | | | | |________________|__________|__________|__________| |Compressive | | | | |strength @ yield| | | | |per ASTM D1621 |240(30) |240(30) |240(30) | |kPa(psi) |480(60) |480(60) |480(60) | |________________|__________|__________|__________| |In Plane Flow Rt| | | | |ASTM D4716-87 | | | | | | | | | |Gradient = 0.1 | | | | |Pressure=37.9kPa| | | | |(5.5psi) | | | | | | | | | |M2/S(gal/min/ft)|(6-15) | (6-15) | (10-100)| |________________|__________|__________|__________| |In Plane Flow Rt| | | | |ASTM D4716-87 | | | | | | | | | |Gradient = 1.0 | | | | |Pressure =100kPa| | | | |(14.5 psi) | | | | | | | | | |M2/S(gal/min/ft)| (6-15) | (6-15) | (10-100) | |________________|__________|__________|__________|