Geotextile Product Data- TNS Mills Inc.

 ___________________________________________________________________________
|Property           |TNS AO4O  |TNS AO45  |TNS AO5O   |TNS AO6O  |TNS AO7O  |
|___________________|__________|__________|___________|__________|__________|                
|Mass Per Unit      |136       |153       |170        |203       |237       |
|g/m2 (oz/yd2)      |(4.0)     |(4.5)     |(5.0)      |(6.0)     |(7.0)     |
|___________________|__________|__________|___________|__________|__________|
|Structure          |NW        |NW        |NW         |NW        |NW        |
|___________________|__________|__________|___________|__________|__________|
|Polymer            |PP        |PP        |PP         |PP        |PP        |
|Composition        |          |          |           |          |          |
|___________________|__________|__________|___________|__________|__________|
|% Open Area        |NP        |NP        |NP         |NP        |NP        |
|CWO-22125          |          |          |           |          |          |
|___________________|__________|__________|___________|__________|__________|
|AOS                |212       |212       |180        |125       |125       |
|ASTM D4491-87      |(70)      |(70)      |(80)       |(120)     |(120)     |
|mm (U.S. Seive)    |          |          |           |          |          |
|___________________|__________|__________|___________|__________|__________|
|Permittivity       |1.70      |1.60      |1.50       |1.20      |1.10      |
|ASTM D4491-92      |(160)     |(140)     |(125)      |(100)     |(95)      |
|sec-1/Flow Rate    |          |          |           |          |          |
|l/min/m2           |          |          |           |          |          |
|(gal/min/ft2)      |          |          |           |          |          |
|___________________|__________|__________|___________|__________|__________|
|Puncture           |(70)      |(75)      |(80)       |(90)      |(120)     |
|ASTM D 4833-88     |          |          |           |          |          |
|kN (lb)            |          |          |           |          |          |
|___________________|__________|__________|___________|__________|__________|
|Mullen             |(230)     |(250)     |(285)      |(325)     |(375)     |
|Burst              |          |          |           |          |          |
|ASTM D 3786-87     |          |          |           |          |          |
|kPa (psi)          |          |          |           |          |          |
|___________________|__________|__________|___________|__________|__________|
|Trapezoid          |(45)      |(50)      |(55)       |(70)      |(80)      |
|Tear Strength      |          |          |           |          |          |
|ASTM D 4533-91     |          |          |           |          |          |
|kN (lb)            |          |          |           |          |          |
|___________________|__________|__________|___________|__________|__________|
|Grab/Tensile       |(100)/50  |(120)/50  |(130)/50   |(155)/50  |(200)/50  |                
|Elongation         |          |          |           |          |          |
|ASTM D 4632-91     |          |          |           |          |          |
|kN (lb)%           |          |          |           |          |          |
|___________________|__________|__________|___________|__________|__________|
|Wide With          |          |          |           |          |          |
|Tensile Elongation |          |          |           |          |          |
|ASTM D 4595-86     |          |          |           |          |          |
|kN/m (lb/in)       |          |          |           |          |          |
|MD                 |NP        |NP        |NP         |NP        |NP        |
|XD                 |NP        |NP        |NP         |NP        |NP        |
|___________________|__________|__________|___________|__________|__________|
|Manufacturer's     |F,D,E     |F,D,E     |F,D,E      |F,D,E     |S/S,D,E,P,|
|Suggested          |          |          |           |          |R         |
|Applications       |          |          |           |          |          |
|___________________|__________|__________|___________|__________|__________|
 W   =Woven                     D   =Drainage
 NW  =Nonwoven                  P   =Protection
 O/C =Other or combination      E   =Erosion Control
 Pet =Polyester                 A/O =Asphalt Overlay
 PP  =Polypropylene             S/F =Silt Fence
 PE  =Polythylene               NA  =Manufacturer determined that
 S/S =Separation/stabilization       this data was not appilicable               
 R   =Reinforcement                  to the product or the data was
 F   =Filtration                     unavailable
                                NP  =Data not provided by manufacturer

Geotextile Product Data-TNS Mills Inc. cont.

 ___________________________________________________________________________
|Property           |TNS AO8O  |TNS AO9O  |TNS A100   |TNS A12O  |TNS A16O  |
|___________________|__________|__________|___________|__________|__________|                
|Mass Per Unit      |271       |305       |339        |407       |543       |
|g/m2 (oz/yd2)      |(8.0)     |(9.0)     |(10.0)     |(12.0)    |(16.0)    |
|___________________|__________|__________|___________|__________|__________|
|Structure          |NW        |NW        |NW         |NW        |NW        |
|___________________|__________|__________|___________|__________|__________|
|Polymer            |PP        |PP        |PP         |PP        |PP        |
|Composition        |          |          |           |          |          |
|___________________|__________|__________|___________|__________|__________|
|% Open Area        |NP        |NP        |NP         |NP        |NP        |
|CWO-22125          |          |          |           |          |          |
|___________________|__________|__________|___________|__________|__________|
|AOS                |125       |125       |125        |106       |106       |
|ASTM D4491-87      |(120)     |(120)     |(120)      |(140)     |(140)     |
|mm (U.S. Seive)    |          |          |           |          |          |
|___________________|__________|__________|___________|__________|__________|
|Permittivity       |0.90      |0.93      |0.90       |0.80      |0.70      |
|ASTM D4491-92      |(85)      |(80)      |(75)       |(50)      |(50)      |
|sec-1/Flow Rate    |          |          |           |          |          |
|l/min/m2           |          |          |           |          |          |
|(gal/min/ft2)      |          |          |           |          |          |
|___________________|__________|__________|___________|__________|__________|
|Puncture           |(140)     |(150)     |(160)      |(180)     |(220)     |
|ASTM D 4833-88     |          |          |           |          |          |
|kN (lb)            |          |          |           |          |          |
|___________________|__________|__________|___________|__________|__________|
|Mullen             |(425)     |(475)     |(500)      |(575)     |(750)     |
|Burst              |          |          |           |          |          |
|ASTM D 3786-87     |          |          |           |          |          |
|kPa (psi)          |          |          |           |          |          |
|___________________|__________|__________|___________|__________|__________|
|Trapezoid          |(95)      |(100)     |(110)      |(130)     |(150)     |
|Tear Strength      |          |          |           |          |          |
|ASTM D 4533-91     |          |          |           |          |          |
|kN (lb)            |          |          |           |          |          |
|___________________|__________|__________|___________|__________|__________|
|Grab/Tensile       |(225)/50  |(235)/50  |(250)/50   |(300)/50  |(400)/50  |                
|Elongation         |          |          |           |          |          |
|ASTM D 4632-91     |          |          |           |          |          |
|kN (lb)%           |          |          |           |          |          |
|___________________|__________|__________|___________|__________|__________|
|Wide With          |          |          |           |          |          |
|Tensile Elongation |          |          |           |          |          |
|ASTM D 4595-86     |          |          |           |          |          |
|kN/m (lb/in)       |          |          |           |          |          |
|MD                 |NP        |NP        |NP         |NP        |NP        |
|XD                 |NP        |NP        |NP         |NP        |NP        |
|___________________|__________|__________|___________|__________|__________|
|Manufacturer's     |S/S,D,E,P,|S/S,D,E,P,|S/S,D,E,P,R|S/S,D,E,P,|S/S,D,E,P,|
|Suggested          |R         |R         |           |R         |R         |
|Applications       |          |          |           |          |          |
|___________________|__________|__________|___________|__________|__________|

 W   =Woven                     D   =Drainage
 NW  =Nonwoven                  P   =Protection
 O/C =Other or combination      E   =Erosion Control
 Pet =Polyester                 A/O =Asphalt Overlay
 PP  =Polypropylene             S/F =Silt Fence
 PE  =Polythylene               NA  =Manufacturer determined that
 S/S =Separation/stabilization       this data was not appilicable               
 R   =Reinforcement                  to the product or the data was
 F   =Filtration                     unavailable
                                NP  =Data not provided by manufacturer