____________________________________________________________________________
|Property |Texel 7643|Texel GEO-9|Texel 918 |F-200 |F500 |
|___________________|__________|___________|___________|__________|__________|
|Mass Per Unit |1460 |310 |475 |200 |310 |
|g/m2 (oz/yd2) | | | | | |
|___________________|__________|___________|___________|__________|__________|
| |NW |NW |NW |NW |NW |
|Structure | |reinforced | | | |
|___________________|__________|___________|___________|__________|__________|
|Polymer |PET,PP |PP |PET,PP |PET |PET |
|Composition | | | | | |
|___________________|__________|___________|___________|__________|__________|
|% Open Area |NA |NA |NA |NA |NA |
|CWO-22125 | | | | | |
|___________________|__________|___________|___________|__________|__________|
|AOS |0.06-0.1 |0.06-0.125 |0.065-0.09 |0.04-0.05 |0.04-0.05 |
|ASTM D4491-87 |(230-140) |(200-120) |(230-170) |(325-270) |(325-270) |
|mm (U.S. Seive) | | | | | |
|___________________|__________|___________|___________|__________|__________|
|Permittivity |0.22 |1.72 |0.66 |0.62 |0.14 |
|ASTM D4491-92 | | | | | |
|sec-1/Flow Rate | | | | | |
|l/min/m2 | | | | | |
|(gal/min/ft2) | | | | | |
|___________________|__________|___________|___________|__________|__________|
|Puncture |NP |NP |NP |NP |NP |
|ASTM D 4833-88 | | | | | |
|kN (lb) | | | | | |
|___________________|__________|___________|___________|__________|__________|
|Mullen |10200 |2400 |3500 |1265 |3500 |
|Burst |(1479) |(348) |(508) |(184) |(508) |
|ASTM D 3786-87 | | | | | |
|kPa (psi) | | | | | |
|___________________|__________|___________|___________|__________|__________|
|Trapezoid |1.3 |0.275 |0.6 |0.2 |0.475 |
|Tear Strength |(293) |(62) |(135) |(46) |(107) |
|ASTM D 4533-91 | | | | | |
|kN (lb) | | | | | |
|___________________|__________|___________|___________|__________|__________|
|Grab/Tensile |3.2 |NP |1.350 |0.4 |1.1 |
|Elongation |(720)/65- | |(304)/50-70|(90)/70- |(248)/70- |
|ASTM D 4632-91 | 95 | | | 100 | 100|
|kN (lb)% | | | | | |
|___________________|__________|___________|___________|__________|__________|
|Wide With | | | | | |
|Tensile Elongation | | | | | |
|ASTM D 4595-86 | | | | | |
|kN/m (lb/in) | | | | | |
|MD |NA |14(80)/21.6|NA |NA |NA |
|XD |NA |NA |NA |NA |NA |
|___________________|__________|___________|___________|__________|__________|
|Manufacturer's |E |R,S/S |E,P liner |F |F |
|Suggested | | | | | |
|Applications | | | | | |
|___________________|__________|___________|___________|__________|__________|
W =Woven D =Drainage
NW =Nonwoven P =Protection
O/C =Other or combination E =Erosion Control
Pet =Polyester A/O =Asphalt Overlay
PP =Polypropylene S/F =Silt Fence
PE =Polythylene NA =Manufacturer determined that
S/S =Separation/stabilization this data was not appilicable
R =Reinforcement to the product or the data was
F =Filtration unavailable
NP =Data not provided by manufacturer