___________________________________________________________________________
|Property |ST-OL |ST35 |ST40 |ST45 |ST60 |
|___________________|__________|__________|___________|__________|__________|
|Mass Per Unit |NA |NA |NA |NA |NA |
|g/m2 (oz/yd2) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Structure |NW |NW |NW |NW |NW |
|___________________|__________|__________|___________|__________|__________|
|Polymer |PP |PP |PP |PP |PP |
|Composition | | | | | |
|___________________|__________|__________|___________|__________|__________|
|% Open Area |NA |NA |NA |NA |NA |
|CWO-22125 | | | | | |
|___________________|__________|__________|___________|__________|__________|
|AOS |NA |0.212 |0.212 |0.212 |0.180 |
|ASTM D4491-87 | |(70) |(70) |(70) |(80) |
|mm (U.S. Seive) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Permittivity |NA |2.2/6110 |2.0/5700 |1.8/5290 |1.5/4070 |
|ASTM D4491-92 | |(140) |(140) |(130) |(110) |
|sec-1/Flow Rate | | | | | |
|l/min/m2 | | | | | |
|(gal/min/ft2) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Puncture |NA |0.24 |0.26 |0.31 |0.40 |
|ASTM D 4833-88 | |(55) |(60) |(70) |(90) |
|kN (lb) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Mullen |1379 |1379 |1482 |1793 |2140 |
|Burst |(200) |(200) |(215) |(260) |(310) |
|ASTM D 3786-87 | | | | | |
|kPa (psi) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Trapezoid |NA |0.180 |0.20 |0.22 |0.29 |
|Tear Strength | |(40) |(45) |(50) |(65) |
|ASTM D 4533-91 | | | | | |
|kN (lb) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Grab/Tensile |0.40 |0.42 |0.47 |0.53 |0.73 |
|Elongation |(90) |(95) |(105) |(120) |(165) |
|ASTM D 4632-91 |55 |50 |50 |50 |50 |
|kN (lb)% | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Wide With | | | | | |
|Tensile Elongation | | | | | |
|ASTM D 4595-86 | | | | | |
|kN/m (lb/in) | | | | | |
|MD |NA |NA |NA |NA |NA |
|XD |NA |NA |NA |NA |NA |
|___________________|__________|__________|___________|__________|__________|
|Manufacturer's |A/O |S/S,F,D |S/S,F,D,R, |S/S,F,D,R,|S/S,F,D,R,|
|Suggested | | |P,E |P,E |P,E |
|Applications | | | | | |
|___________________|__________|__________|___________|__________|__________|
W =Woven D =Drainage
NW =Nonwoven P =Protection
O/C =Other or combination E =Erosion Control
Pet =Polyester A/O =Asphalt Overlay
PP =Polypropylene S/F =Silt Fence
PE =Polythylene NA =Manufacturer determined that
S/S =Separation/stabilization this data was not appilicable
R =Reinforcement to the product or the data was
F =Filtration unavailable
NP =Data not provided by manufacturer
Geotextile Product Data-Spartan Technologies cont.
___________________________________________________________________________
|Property |ST70 |ST80 |ST100 |ST120 |ST160 |
|___________________|__________|__________|___________|__________|__________|
|Mass Per Unit |NA |NA |NA |NA |NA |
|g/m2 (oz/yd2) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Structure |NW |NW |NW |NW |NW |
|___________________|__________|__________|___________|__________|__________|
|Polymer |PP |PP |PP |PP |PP |
|Composition | | | | | |
|___________________|__________|__________|___________|__________|__________|
|% Open Area |NA |NA |NA |NA |NA |
|CWO-22125 | | | | | |
|___________________|__________|__________|___________|__________|__________|
|AOS |0.180 |0.180 |0.150 |0.150 |0.125 |
|ASTM D4491-87 |(80) |(80) |(100) |(100) |(120) |
|mm (U.S. Seive) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Permittivity |1.3/4480 |1.2/3255 |1.1/2850 |0.8/2445 |0.6/1830 |
|ASTM D4491-92 |(110) |(80) |(70) |(60) |(45) |
|sec-1/Flow Rate | | | | | |
|l/min/m2 | | | | | |
|(gal/min/ft2) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Puncture |0.44 |0.51 |0.67 |0.76 |1.1 |
|ASTM D 4833-88 |(100) |(115) |(150) |(170) |(25) |
|kN (lb) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Mullen |2276 |2482 |3103 |3793 |5172 |
|Burst |(330) |(360) |(450) |(550) |(750) |
|ASTM D 3786-87 | | | | | |
|kPa (psi) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Trapezoid |0.33 |0.39 |0.44 |0.51 |0.73 |
|Tear Strength |(75) |(85) |(100) |(115) |(165) |
|ASTM D 4533-91 | | | | | |
|kN (lb) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Grab/Tensile |0.89 |0.96 |1.27 |1.45 |1.89 |
|Elongation |(200) |(215) |(285) |(325) |(425) |
|ASTM D 4632-91 |50 |50 |50 |50 |50 |
|kN (lb)% | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Wide With | | | | | |
|Tensile Elongation | | | | | |
|ASTM D 4595-86 | | | | | |
|kN/m (lb/in) | | | | | |
|MD |NA |NA |NA |NA |NA |
|XD |NA |NA |NA |NA |NA |
|___________________|__________|__________|___________|__________|__________|
|Manufacturer's |S/S,F,D,R,|S/S,F,D,R,|S/S,R,P,E |S/S,R,P,E |S/S,R,P,E |
|Suggested |P,E |P,E | | | |
|Applications | | | | | |
|___________________|__________|__________|___________|__________|__________|
W =Woven D =Drainage
NW =Nonwoven P =Protection
O/C =Other or combination E =Erosion Control
Pet =Polyester A/O =Asphalt Overlay
PP =Polypropylene S/F =Silt Fence
PE =Polythylene NA =Manufacturer determined that
S/S =Separation/stabilization this data was not appilicable
R =Reinforcement to the product or the data was
F =Filtration unavailable
NP =Data not provided by manufacturer