___________________________________________________________________________
|Property |TS420 |TS500 |TS550 |TS600 |TS650 |
|___________________|__________|__________|___________|__________|__________|
|Mass Per Unit |120(3.5) |135(4) |170(5) |205(6) |240(7) |
|g/m2 (oz/yd2) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Structure |NW |NW |NW |NW |NW |
|___________________|__________|__________|___________|__________|__________|
|Polymer |PP |PP |PP |PP |PP |
|Composition | | | | | |
|___________________|__________|__________|___________|__________|__________|
|% Open Area |NA |NA |NA |NA |NA |
|CWO-22125 | | | | | |
|___________________|__________|__________|___________|__________|__________|
|AOS | | | | | |
|ASTM D4491-87 |0.425 |0.300 |0.300 |0.250 |0.250 |
|mm (U.S. Seive) |(40) |(50) |(50) |(60) |(60) |
|___________________|__________|__________|___________|__________|__________|
|Permittivity |2.4 |2.2 |1.9 |1.8 |1.6 |
|ASTM D4491-92 |7330 |6720 |5700 |5490 |4880 |
|sec-1/Flow Rate |(180) |(165) |(140) |(135) |(120) |
|l/min/m2 | | | | | |
|(gal/min/ft2) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Puncture |0.220 |0.265 |0.310 |0.335 |0.400 |
|ASTM D 4833-88 |(50) |(65) |(70) |(75) |(90) |
|kN (lb) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Mullen |1205 |1380 |1655 |2000 |2415 |
|Burst |(175) |(200) |(240) |(290) |(350) |
|ASTM D 3786-87 | | | | | |
|kPa (psi) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Trapezoid |0.220 |0.220 |0.265 |0.310 |0.335 |
|Tear Strength |(45) |(50) |(60) |(70) |(75) |
|ASTM D 4533-91 | | | | | |
|kN (lb) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Grab/Tensile |0.400 |0.510 |0.580 |0.710 |0.800 |
|Elongation |(90)50 |(115)50 |(130)80 |(160)50 |(180)50 |
|ASTM D 4632-91 | | | | | |
|kN (lb)% | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Wide With | | | | | |
|Tensile Elongation | | | | | |
|ASTM D 4595-86 | | | | | |
|kN/m (lb/in) | | | | | |
|MD |5.3 |8.8 |9.6 |10.5 |12.3 |
| | | | |(60)80 |(70)80 |
|XD |(30)80 |(50)80 |(55)30 |10.5 |14.0 |
| | | | |(60)80 |(80)30 |
|___________________|__________|__________|___________|__________|__________|
|Manufacturer's |S/S,R,F,D,|S/S,R,F,D,|S/S,R,F,D, |S/S,R,F,D,|S/S,R,F,D,|
|Suggested |P,E,S/F |P,E |P,E,S/F |P,E |P,E |
|Applications | | | | | |
|___________________|__________|__________|___________|__________|__________|
W =Woven D =Drainage
NW =Nonwoven P =Protection
O/C =Other or combination E =Erosion Control
Pet =Polyester A/O =Asphalt Overlay
PP =Polypropylene S/F =Silt Fence
PE =Polythylene NA =Manufacturer determined that
S/S =Separation/stabilization this data was not appilicable
R =Reinforcement to the product or the data was
F =Filtration unavailable
NP =Data not provided by manufacturer
Geotextile Product Data-Polyfelt Americas Inc. cont
.
___________________________________________________________________________
|Property |TS700 |TS750 |TS800 |TS1000 |PGM13 |
|___________________|__________|__________|___________|__________|__________|
|Mass Per Unit |270 |340 |410 |540 |120 |
|g/m2 (oz/yd2) |(8) |(70) |(12) |(16) |(3.5) |
|___________________|__________|__________|___________|__________|__________|
|Structure |NW |NW |NW |NW |NW |
|___________________|__________|__________|___________|__________|__________|
|Polymer |PP |PP |PP |PP |PP |
|Composition | | | | | |
|___________________|__________|__________|___________|__________|__________|
|% Open Area |NA |NA |NA |NA |NA |
|CWO-22125 | | | | | |
|___________________|__________|__________|___________|__________|__________|
|AOS |0.212 |0.180 |0.15 |0.150 |NA |
|ASTM D4491-87 |(70) |(80) |(100) |(100) | |
|mm (U.S. Seive) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Permittivity |1.3 |1.1 |1.0 |0.6 |NA |
|ASTM D4491-92 |4070 |3260 |3050 |1830 | |
|sec-1/Flow Rate |(100) |(80) |(75) |(45) | |
|l/min/m2 | | | | | |
|(gal/min/ft2) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Puncture |0.445 |0.555 |0.600 |0.710 |0.200 |
|ASTM D 4833-88 |(100) |(125) |(135) |(160) |(45) |
|kN (lb) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Mullen |2760 |3105 |3450 |3795 |NA |
|Burst |(400) |(450) |(500) |(550) | |
|ASTM D 3786-87 | | | | | |
|kPa (psi) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Trapezoid |0.380 |0.445 |0.490 |0.535 |0.200 |
|Tear Strength |(85) |(100) |(110) |(120) |(45) |
|ASTM D 4533-91 | | | | | |
|kN (lb) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Grab/Tensile |0.935 |1.11 |1.33 |1.51 |0.400 |
|Elongation |(210) |(250) |(300) |(340) |(90) |
|ASTM D 4632-91 |50 |50 |50 |50 |50 |
|kN (lb)% | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Wide With | | | | | |
|Tensile Elongation | | | | | |
|ASTM D 4595-86 | | | | | |
|kN/m (lb/in) | | | | | |
|MD |13.1 |15.8 |19.3 |24.5 |NA |
| |(75) |(90) |(110) |(140) | |
| |80 |80 |30 |80 | |
|XD |15.8 |17.5 |21.0 |24.5 |NA |
| |(90) |(100) |(120) |(140) | |
| |30 |40 |40 |40 | |
|___________________|__________|__________|___________|__________|__________|
|Manufacturer's |S/S,R,F,D,|S/S,R,F,D,|S/S,R,F,D, |S/S,R,F,D,|A/O |
|Suggested |P,E |P,E |P,E |P,E | |
|Applications | | | | | |
|___________________|__________|__________|___________|__________|__________|
W =Woven D =Drainage
NW =Nonwoven P =Protection
O/C =Other or combination E =Erosion Control
Pet =Polyester A/O =Asphalt Overlay
PP =Polypropylene S/F =Silt Fence
PE =Polythylene NA =Manufacturer determined that
S/S =Separation/stabilization this data was not appilicable
R =Reinforcement to the product or the data was
F =Filtration unavailable
NP =Data not provided by manufacturer
Geotextile Product Data-Polyfelt Americas Inc. cont.
_________________________________________
|Property |PGM15 |PGM20 |
|___________________|__________|__________|
|Mass Per Unit |142 |193 |
|g/m2 (oz/yd2) |(4.2) |(5.7) |
|___________________|__________|__________|
|Structure |NW |NW |
|___________________|__________|__________|
|Polymer |PP |PP |
|Composition | | |
|___________________|__________|__________|
|% Open Area |NA |NA |
|CWO-22125 | | |
|___________________|__________|__________|
|AOS |NA |NA |
|ASTM D4491-87 | | |
|mm (U.S. Seive) | | |
|___________________|__________|__________|
|Permittivity |NA |NA |
|ASTM D4491-92 | | |
|sec-1/Flow Rate | | |
|l/min/m2 | | |
|(gal/min/ft2) | | |
|___________________|__________|__________|
|Puncture |0.200 |0.310 |
|ASTM D 4833-88 |(45) |(70) |
|kN (lb) | | |
|___________________|__________|__________|
|Mullen |NA |NA |
|Burst | | |
|ASTM D 3786-87 | | |
|kPa (psi) | | |
|___________________|__________|__________|
|Trapezoid |0.220 |0.290 |
|Tear Strength |(50) |(65) |
|ASTM D 4533-91 | | |
|kN (lb) | | |
|___________________|__________|__________|
|Grab/Tensile |0.445 |0.625 |
|Elongation |(100) |(140) |
|ASTM D 4632-91 |50 |50 |
|kN (lb)% | | |
|___________________|__________|__________|
|Wide With | | |
|Tensile Elongation | | |
|ASTM D 4595-86 | | |
|kN/m (lb/in) | | |
|MD |NA |NA |
|XD |NA |NA |
|___________________|__________|__________|
|Manufacturer's |A/O |A/O |
|Suggested | | |
|Applications | | |
|___________________|__________|__________|
W =Woven D =Drainage
NW =Nonwoven P =Protection
O/C =Other or combination E =Erosion Control
Pet =Polyester A/O =Asphalt Overlay
PP =Polypropylene S/F =Silt Fence
PE =Polythylene NA =Manufacturer determined that
S/S =Separation/stabilization this data was not appilicable
R =Reinforcement to the product or the data was
F =Filtration unavailable
NP =Data not provided by manufacturer