___________________________________________________________________________
|Property |Trevira |Trevira |Trevira |Trevira |Trevira |
| |011/120 |011/140 |011/200 |011/250 |011/280 |
|___________________|__________|__________|___________|__________|__________|
|Mass Per Unit |112 |136 |193 |241 |271 |
|g/m2 (oz/yd2) |(3.3) |(4.0) |(5.7) |(7.1) |(8.0) |
|___________________|__________|__________|___________|__________|__________|
|Structure |NW |NW |NW |NW |NW |
|___________________|__________|__________|___________|__________|__________|
|Polymer |PET |PET |PET |PET |PET |
|Composition | | | | | |
|___________________|__________|__________|___________|__________|__________|
|% Open Area |NA |NA |NA |NA |NA |
|CWO-22125 | | | | | |
|___________________|__________|__________|___________|__________|__________|
|AOS |0.300 |0.300 |0.210 |0.241 |271 |
|ASTM D4491-87 |(50) |(50) |(70) |(7.1) |(8.0) |
|mm (U.S. Seive) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Permittivity |2.07/105 |2.01/102 |1.74/88 |1.47/75 |1.20/61 |
|ASTM D4491-92 |(155) |(150) |(130) |(110) |(90) |
|sec-1/Flow Rate | | | | | |
|l/min/m2 | | | | | |
|(gal/min/ft2) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Puncture |0.200 |0.222 |0.356 |0.423 |0.444 |
|ASTM D 4833-88 |(45) |(50) |(80) |(95) |(100) |
|kN (lb) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Mullen |1173 |1311 |1965 |2484 |2622 |
|Burst |(170) |(190) |(285) |(360) |(380) |
|ASTM D 3786-87 | | | | | |
|kPa (psi) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Trapezoid |0.133 |0.178 |0.267 |0.334 |0.356 |
|Tear Strength |(30) |(40) |(60) |(75) |(80) |
|ASTM D 4533-91 | | | | | |
|kN (lb) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Grab/Tensile |0.400 |0.489 |0.711 |0.933 |1.023 |
|Elongation |(90) 60 |(110) 60 |(160) 60 |(210) 60 |(230) 60 |
|ASTM D 4632-91 | | | | | |
|kN (lb)% | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Wide With | | | | | |
|Tensile Elongation | | | | | |
|ASTM D 4595-86 | | | | | |
|kN/m (lb/in) | | | | | |
|MD |9.0(51.1) |10.9(62.1)|14.4(82.5) |17.1(97.6)|18.3 |
| | 76.1(A) | 69.6 | 70.4 | 65.0 | (104.6) |
| | | | | | 68.1 |
|XD |6.4(36.6) |7.4(42) |7.4(42) |14.8(84.6)|18.8 |
| | 82.2(A) | 70.4 | 70.4 | 75.0 | (107.5) |
| | | | | | 72.1 |
|___________________|__________|__________|___________|__________|__________|
|Manufacturer's |F,D,A/O |F,D,E,A/O |F,D,E,S/S |F,D,E,S/S |F,D,E,S/S,|
|Suggested | | | | |R |
|Applications | | | | | |
| | | | | | |
| | | | | | |
|___________________|__________|__________|___________|__________|__________|
W =Woven D =Drainage
NW =Nonwoven P =Protection
O/C =Other or combination E =Erosion Control
Pet =Polyester A/O =Asphalt Overlay
PP =Polypropylene S/F =Silt Fence
PE =Polythylene NA =Manufacturer determined that
S/S =Separation/stabilization this data was not appilicable
R =Reinforcement to the product or the data was
F =Filtration unavailable
NP =Data not provided by manufacturer
Geotextile Product Data- Contech Construction Products Inc. cont.
___________________________________________________________________________
|Property |Trevira |Trevira |Trevira |Trevira |C200 |
| |011/350 |011/420 |011/450 |011/550 | |
|___________________|__________|__________|___________|__________|__________|
|Mass Per Unit |339(10.0) |406(12.0) |441(13.0) |542(16.0) |NA |
|g/m2 (oz/yd2) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Structure |NW |NW |NW |NW |W |
|___________________|__________|__________|___________|__________|__________|
|Polymer |PET |PET |PET |PET |PP |
|Composition | | | | | |
|___________________|__________|__________|___________|__________|__________|
|% Open Area |NA |NA |NA |NA |NA |
|CWO-22125 | | | | | |
|___________________|__________|__________|___________|__________|__________|
|AOS |0.210 |0.210 |0.149 |0.149 |0.60 |
|ASTM D4491-87 |(70) |(70) |(100) |(100) |(30) |
|mm (U.S. Seive) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Permittivity |1.07/54 |0.87/44 |0.53/27 |0.53/27 |0.07/244 |
|ASTM D4491-92 |(80) |(65) |(40) |(40) |(6) |
|sec-1/Flow Rate | | | | | |
|l/min/m2 | | | | | |
|(gal/min/ft2) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Puncture |0.578 |0.667 |0.867 |0.689 |0.450 |
|ASTM D 4833-88 |(130) |(130) |(195) |(155) |(100) |
|kN (lb) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Mullen |3519 |3795 |5382 |4416 |3101 |
|Burst |(510) |(550) |(780) |(640) |(450) |
|ASTM D 3786-87 | | | | | |
|kPa (psi) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Trapezoid |0.444 |0.534 |0.667 |0.578 |0.38 X |
|Tear Strength |(100) |(120) |(150) |(130) |0.40 |
|ASTM D 4533-91 | | | | |(85 X 90) |
|kN (lb) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Grab/Tensile |1.356 |1.556(350)|2.224(500) |1.734(390)|0.89 X |
|Elongation |(305) 60 |60 |70 |65 |0.89/15 |
|ASTM D 4632-91 | | | | |(200 X |
|kN (lb)% | | | | |200)/15 |
|___________________|__________|__________|___________|__________|__________|
|Wide With | | | | | |
|Tensile Elongation | | | | | |
|ASTM D 4595-86 | | | | | |
|kN/m (lb/in) | | | | | |
|MD |26.8 |NA |36.0 |32.1 |21.0 |
| |(152.9) | |(205.5) |(183.5) |(120) |
| |74.2 | | | | |
|XD |25.5 |NA |28.8 |27.6 |21.0 |
| |(134.1) | |(164.7) |(157.6) |(120) |
| |72.1 | | | | |
|___________________|__________|__________|___________|__________|__________|
|Manufacturer's |R,F,P,E, |R,P,S/S |R,P,S/S |R,P,S/S |SS,O/C |
|Suggested |S/S | | | | |
|Applications | | | | | |
|___________________|__________|__________|___________|__________|__________|
W =Woven D =Drainage
NW =Nonwoven P =Protection
O/C =Other or combination E =Erosion Control
Pet =Polyester A/O =Asphalt Overlay
PP =Polypropylene S/F =Silt Fence
PE =Polythylene NA =Manufacturer determined that
S/S =Separation/stabilization this data was not appilicable
R =Reinforcement to the product or the data was
F =Filtration unavailable
NP =Data not provided by manufacturer
Geotextile Product Data- Contech Construction Products Inc. cont.
______________________________________________
|Property |C300 |C70/06 |
|___________________|__________|_______________|
|Mass Per Unit |NA |NA |
|g/m2 (oz/yd2) | | |
|___________________|__________|_______________|
|Structure |W |W monofilament |
|___________________|__________|_______________|
|Polymer |PP |PP |
|Composition | | |
|___________________|__________|_______________|
|% Open Area |NA |4.00 |
|CWO-22125 | | |
|___________________|__________|_______________|
|AOS |0.60 |0.212 |
|ASTM D4491-87 |(30) |(70) |
|mm (U.S. Seive) | | |
|___________________|__________|_______________|
|Permittivity |0.06/203 |0.28/732 |
|ASTM D4491-92 |(5) |(18) |
|sec-1/Flow Rate | | |
|l/min/m2 | | |
|(gal/min/ft2) | | |
|___________________|__________|_______________|
|Puncture |0.533 |0.667 |
|ASTM D 4833-88 |(120) |(150) |
|kN (lb) | | |
|___________________|__________|_______________|
|Mullen |4134 |3307 |
|Burst |(600) |(480) |
|ASTM D 3786-87 | | |
|kPa (psi) | | |
|___________________|__________|_______________|
|Trapezoid |0.53 X |0.42 X |
|Tear Strength |0.53 |0.24 |
|ASTM D 4533-91 |(120 X |(95 X 55) |
|kN (lb) | 120) | |
|___________________|__________|_______________|
|Grab/Tensile |1.33 X |1.76 X |
|Elongation |1.33/15 |1.16/24 |
|ASTM D 4632-91 |(300 X |(395 X |
|kN (lb)% |300)/15 |260)/24 |
|___________________|__________|_______________|
|Wide With | | |
|Tensile Elongation | | |
|ASTM D 4595-86 | | |
|kN/m (lb/in) | | |
|MD |30.6(175) |NA |
|XD |30.6(175) |NA |
|___________________|__________|_______________|
|Manufacturer's |SS,O/C,R |SS,O/C,F,D,E |
|Suggested | | |
|Applications | | |
|___________________|__________|_______________|
W =Woven D =Drainage
NW =Nonwoven P =Protection
O/C =Other or combination E =Erosion Control
Pet =Polyester A/O =Asphalt Overlay
PP =Polypropylene S/F =Silt Fence
PE =Polythylene NA =Manufacturer determined that
S/S =Separation/stabilization this data was not appilicable
R =Reinforcement to the product or the data was
F =Filtration unavailable
NP =Data not provided by manufacturer