
Geotextile Product Data - Bradley Industrial Textiles Inc.
___________________________________________________________________________
|Property |Phoenix |Phoenix |Phoenix |Phoenix |Phoenix |
| |SCS-1 |M-288-D |M-288-E |M-288-S |(4-60) |
|___________________|__________|__________|___________|__________|__________|
|Mass Per Unit |NA |NA |NA |NA |NA |
|g/m2 (oz/yd2) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Structure |NW |NW |NW |NW |NW |
|___________________|__________|__________|___________|__________|__________|
|Polymer |PET |PET |PET |PET |PET |
|Composition | | | | | |
|___________________|__________|__________|___________|__________|__________|
|% Open Area |NA |NA |NA |NA |NA |
|CWO-22125 | | | | | |
|___________________|__________|__________|___________|__________|__________|
|AOS |0.210 |0.300 |0.210 |0.210 |NA |
|ASTM D4491-87 |(70) |(50) |(70) |(70) | |
|mm (U.S. Seive) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Permittivity |1.4 |1.9 |1.09 |1.6 |NA |
|ASTM D4491-92 |(110) |(145) |(90) |(120) | |
|sec-1/Flow Rate | | | | | |
|l/min/m2 | | | | | |
|(gal/min/ft2) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Puncture |(90) |(45) |(95) |(55) |NA |
|ASTM D 4833-88 | | | | | |
|kN (lb) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Mullen |(350) |(180) |(370) |(190) |NA |
|Burst | | | | | |
|ASTM D 3786-87 | | | | | |
|kPa (psi) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Trapezoid |(70) |(35) |(75) |(45) |NA |
|Tear Strength | | | | | |
|ASTM D 4533-91 | | | | | |
|kN (lb) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Grab/Tensile |(180) |(90) |(200) |130 |NA |
|Elongation |60 |60 |60 |60 | |
|ASTM D 4632-91 | | | | | |
|kN (lb)% | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Wide With | | | | | |
|Tensile Elongation | | | | | |
|ASTM D 4595-86 | | | | | |
|kN/m (lb/in) | | | | | |
|MD |NA |NA |NA |NA |NA |
|XD |NA |NA |NA |NA |NA |
|___________________|__________|__________|___________|__________|__________|
|Manufacturer's |D,E,F,S/S,|D,E,F,S/S |D,E,F,S/S,R|D,E,F,S/S |R,D,E,F, |
|Suggested |R | | | |S/S |
|Applications | | | | | |
|___________________|__________|__________|___________|__________|__________|
W =Woven D =Drainage
NW =Nonwoven P =Protection
O/C =Other or combination E =Erosion Control
Pet =Polyester A/O =Asphalt Overlay
PP =Polypropylene S/F =Silt Fence
PE =Polythylene NA =Manufacturer determined that
S/S =Separation/stabilization this data was not appilicable
R =Reinforcement to the product or the data was
F =Filtration unavailable
NP =Data not provided by manufacturer