___________________________________________________________________________
|Property |304 |776 |777 |113 |806 |
|___________________|__________|__________|___________|__________|__________|
|Mass Per Unit |NA |NA |NA |NA |NA |
|g/m2 (oz/yd2) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Structure |W |W |W |W |W |
|___________________|__________|__________|___________|__________|__________|
|Polymer |PP |PP |PP |PP |PP |
|Composition | | | | | |
|___________________|__________|__________|___________|__________|__________|
|% Open Area |NA |NA |NA |NA |NA |
|CWO-22125 | | | | | |
|___________________|__________|__________|___________|__________|__________|
|AOS |0.425 |0.425 |0.425 |0.425 |0.850 |
|ASTM D4491-87 |(40) |(40) |(40) |(40) |(20) |
|mm (U.S. Seive) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Permittivity |0.10/305 |0.10/326 |0.05/143 |NA |0.45/1222 |
|ASTM D4491-92 |(7.5) |(8.0) |(3.5) | |(30) |
|sec-1/Flow Rate | | | | | |
|l/min/m2 | | | | | |
|(gal/min/ft2) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Puncture |0.20 |0.36 |0.62 |0.82 |0.09 |
|ASTM D 4833-88 |(45) |(80) |(140) |(185) |(20) |
|kN (lb) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Mullen |2068 |2758 |4137 |4826 |1379 |
|Burst |(300) |(400) |(600) |(700) |(200) |
|ASTM D 3786-87 | | | | | |
|kPa (psi) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Trapezoid |0.22 |0.24 (55) |0.44 |0.44 (100)|0.13 |
|Tear Strength |(50) |MD |(100) |MD |(30) |
|ASTM D 4533-91 | |0.40 (40) | |0.33 (75) | |
|kN (lb) | |XMD | |XMD | |
|___________________|__________|__________|___________|__________|__________|
|Grab/Tensile |0.67(150)/|0.89(200)/|1.33(300)/ |1.78(400)/|0.31(70)/ |
|Elongation | 15MD| 14| 15| 15MD | 10|
|ASTM D 4632-91 |0.44(100)/| | |1.58(340)/| |
|kN (lb)% | 10XMD| | | 15XMD| |
|___________________|__________|__________|___________|__________|__________|
|Wide With | | | | | |
|Tensile Elongation | | | | | |
|ASTM D 4595-86 | | | | | |
|kN/m (lb/in) | | | | | |
|MD |NA |NA |NA |NA |NA |
|XD |NA |NA |NA |NA |NA |
|___________________|__________|__________|___________|__________|__________|
|Manufacturer's |S/S |S/S |S/S |S/S |S/F |
|Suggested | | | | | |
|Applications | | | | | |
|___________________|__________|__________|___________|__________|__________|
W =Woven D =Drainage
NW =Nonwoven P =Protection
O/C =Other or combination E =Erosion Control
Pet =Polyester A/O =Asphalt Overlay
PP =Polypropylene S/F =Silt Fence
PE =Polythylene NA =Manufacturer determined that
S/S =Separation/stabilization this data was not appilicable
R =Reinforcement to the product or the data was
F =Filtration unavailable
NP =Data not provided by manufacturer
Geotextile Product Data-Belton Industries Inc. cont.
_________________________________________
|Property |751 |751 |
|___________________|__________|__________|
|Mass Per Unit |NA |NA |
|g/m2 (oz/yd2) | | |
|___________________|__________|__________|
|Structure |W |W |
|___________________|__________|__________|
|Polymer |PP |PP |
|Composition | | |
|___________________|__________|__________|
|% Open Area |NA |NA |
|CWO-22125 | | |
|___________________|__________|__________|
|AOS |0.600 |130 |
|ASTM D4491-87 |(30) |(15) |
|mm (U.S. Seive) | | |
|___________________|__________|__________|
|Permittivity |0.23/610 |0.35/978 |
|ASTM D4491-92 |(15) |(24) |
|sec-1/Flow Rate | | |
|l/min/m2 | | |
|(gal/min/ft2) | | |
|___________________|__________|__________|
|Puncture |0.20 |0.09 |
|ASTM D 4833-88 |(45) |(20) |
|kN (lb) | | |
|___________________|__________|__________|
|Mullen |2068 |1034 |
|Burst |(300) |(150) |
|ASTM D 3786-87 | | |
|kPa (psi) | | |
|___________________|__________|__________|
|Trapezoid |0.22 |0.09 |
|Tear Strength |(50) |(20) |
|ASTM D 4533-91 | | |
|kN (lb) | | |
|___________________|__________|__________|
|Grab/Tensile |0.53(120)/|0.31(70)/ |
|Elongation | 10MD| 10MD|
|ASTM D 4632-91 |0.42(95)/ |0.18(40)/ |
|kN (lb)% | 10XMD| 10XMD|
|___________________|__________|__________|
|Wide With | | |
|Tensile Elongation | | |
|ASTM D 4595-86 | | |
|kN/m (lb/in) | | |
|MD |NA |NA |
|XD |NA |NA |
|___________________|__________|__________|
|Manufacturer's |S/F |S/F |
|Suggested | | |
|Applications | | |
|___________________|__________|__________|
W =Woven D =Drainage
NW =Nonwoven P =Protection
O/C =Other or combination E =Erosion Control
Pet =Polyester A/O =Asphalt Overlay
PP =Polypropylene S/F =Silt Fence
PE =Polythylene NA =Manufacturer determined that
S/S =Separation/stabilization this data was not appilicable
R =Reinforcement to the product or the information
was unavailable
NP =Data not provided by manufacturer