____________________________________________________________________________
|Property |Amoco 1198|Amoco 1199|Amoco 1380 |Amoco 2000|Amoco 2002|
|___________________|__________|__________|___________|__________|__________|
|Mass Per Unit |NA |NA |NA |NA |NA |
|g/m2 (oz/yd2 | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Structure |W |W |W |W |W |
|___________________|__________|__________|___________|__________|__________|
|Ploymer |PP |PP |PP |PP |PP |
|Composition | | | | | |
|___________________|__________|__________|___________|__________|__________|
|% Open Area |NA |NA |NA |NA |NA |
|CWO-22125 | | | | | |
|___________________|__________|__________|___________|__________|__________|
|AOS |0.425 |0.212 |0.600 |0.600 |0.300 |
|ASTM D4491-87 |(40) |(70) |(30) |(30) |(50) |
|mm (US Seive) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Permittivity |0.05/2032 |0.28/731 |0.40/1219 |0.04/163 |0.04/163 |
|ASTM D4491-92 |(50) |(18) |(30) |(4) |(4) |
|sec-1/Flow Rate | | | | | |
|1/min/m2 | | | | | |
|(gal/min/ft2) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Puncture |0.53 |0.60 |0.36 |0.29 |0.040 |
|ASTM D 4833-88 |(120) |(135) |(80) |(65) |(90) |
|kN (lb) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Mullen |3100 |3307 |2026 |2239 |2756 |
|Burst |(450) |(480) |(300) |(325) |(400) |
|ASTM D 3786-87 | | | | | |
|kPa (psi) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Trapezoid |0.29 |0.42 |0.22 |0.20 |0.33 |
|Tear Strength |(65) |(95)warp |(50) |(45) |(75) |
|ASTM D 4533-91 | |0.24 | | | |
|kN (lb) | |(55)fill | | | |
|___________________|__________|__________|___________|__________|__________|
|Grab/Tensile |1.34 x |1.56 x |0.78 |0.62(140) |0.89(200) |
|Elongation | 0.89/15| 1.11/15|(175)/25 |(140)/15 |(140)/15 |
|ASTM D 4632-91 |(300 x |(350 x | | | |
|kN (lb)% | 200)/15 | 250)/15 | | | |
|___________________|__________|__________|___________|__________|__________|
|Wide With | | | | | |
|Tensile Elongation | | | | | |
|ASTM D 4595-86 | | | | | |
|kN/m (lb/in) | | | | | |
|MD |NP |NP |NP |NP |21(120)/10|
|XD |NP |NP |NP |NP |21(120)/6 |
|___________________|__________|__________|___________|__________|__________|
|Manufacturer's |Erosion, |Erosion, |S/F |S/S |S/S |
|Suggested |Drainage, |Drainage, | | | |
|Applications |Filtration|Filtration| | | |
|___________________|__________|__________|___________|__________|__________|
W =Woven D =Drainage
NW =Nonwoven P =Protection
O/C =Other or combination E =Erosion Control
Pet =Polyester A/O =Asphalt Overlay
PP =Polypropylene S/F =Silt Fence
PE =Polythylene NA =Manufacturer determined that
S/S =Separation/stabilization this data was not appilicable
R =Reinforcement to the product or the data was
F =Filtration unavailable
NP =Data not provided by manufacturer
____________________________________________________________________________
|Property |Amoco 2006|Amoco 2016|Amoco 2019 |Amoco 2044|Amoco 2122|
|___________________|__________|__________|___________|__________|__________|
|Mass Per Unit |NA |NA |NA |NA |NA |
|g/m2 (oz/yd2) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Structure |W |W |W |W |W |
|___________________|__________|__________|___________|__________|__________|
|Polymer |PP |PP |PP |PP |PP |
|Composition | | | | | |
|___________________|__________|__________|___________|__________|__________|
|% Open Area |NA |NA |NA |NA |NA |
|CWO-22125 | | | | | |
|___________________|__________|__________|___________|__________|__________|
|AOS |0.425 |0.425 |0.212 |0.600 |0.600 |
|ASTM D4491-87 |(40) |(40) |(70) |(30) |(30) |
|mm (U.S. Seive) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Permittivity |0.02/81 |0.55/1625 |0.04/203 |0.15/406 |NA/3657 |
|ASTM D4491-92 |(2) |(40) |(5) |(10) |(90) |
|sec-1/Flow Rate | | | | | |
|l/min/m2 | | | | | |
|(gal/min/ft2) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Puncture |0.53 |0.53 |0.62 |0.62 |0.29 |
|ASTM D 4833-88 |(120) |(120) |(140) |(140) |(65) |
|kN (lb) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Mullen |4134 |5512 |3514 |9302 |1895 |
|Burst |(600) |(800) |(510) |(1350) |(275) |
|ASTM D 3786-87 | | | | | |
|kPa (psi) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Trapezoid |0.53 |0.53 |0.29 |1.11 |0.22 |
|Tear Strength |(120) |(120) |(65) |(250) |(50) |
|ASTM D 4533-91 | | | | | |
|kN (lb) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Grab/Tensile |1.34 |1.34 |1.56 x |2.67 x |0.53 x |
|Elongation |(300)/15 |(200)/15 | 1.11/15| 2.23/15 | 0.45/15 |
|ASTM D 4632-91 | | |(350 x |(600 x |(120 x |
|kN (lb)% | | | 250)/15| 500)/15 | 100)/15 |
|___________________|__________|__________|___________|__________|__________|
|Wide With | | | | | |
|Tensile Elongation | | | | | |
|ASTM D 4595-86 | | | | | |
|kN/m (lb/in) | | | | | |
|MD |31(175)/15|35(200)/15|NP |70(400)/18|NP |
|XD |31(175)/15|35(200)/7 |NP |70(400)/8 |NP |
|___________________|__________|__________|___________|__________|__________|
|Manufacturer's |S/S,R |E,S/S |E |S/S,R |S/F |
|Suggested | | | | | |
|Applications | | | | | |
|___________________|__________|__________|___________|__________|__________|
W =Woven D =Drainage
NW =Nonwoven P =Protection
O/C =Other or combination E =Erosion Control
Pet =Polyester A/O =Asphalt Overlay
PP =Polypropylene S/F =Silt Fence
PE =Polythylene NA =Manufacturer determined that
S/S =Separation/stabilization this data was not appilicable
R =Reinforcement to the product or the data was
F =Filtration unavailable
NP =Data not provided by manufacturer
_ __________________________________________________________________________
|Property |Amoco 2125|Amoco 2127|Amoco 2130 |Amoco 2155|Amoco 7630|
|___________________|__________|__________|___________|__________|__________|
|Mass Per Unit |NA |NA |NA |NA |NA |
|g/m2 (oz/yd2) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Structure |W |W |W |W |W |
|___________________|__________|__________|___________|__________|__________|
|Polymer |PP |PP |PP |PP |PP |
|Composition | | | | | |
|___________________|__________|__________|___________|__________|__________|
|% Open Area |NA |NA |NA |NA |NA |
|CW0-22125 | | | | | |
|___________________|__________|__________|___________|__________|__________|
|AOS |0.850 |2.00 |0.600 |0.250 |NA |
|ASTM D4491-87 |(20) |(10) |(30) |(20) | |
|mm (U.S. Seive) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Permittivity |NA/609 |NA/1219 |NA/406 |NA/609 |NA |
|ASTM D4491-92 |(15) |(30) |(10) |(15) | |
|sec-1/Flow Rate | | | | | |
|l/min/m2 | | | | | |
|(gal/min/ft2) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Puncture |0.27 |0.13 |0.27 |0.27 |NA |
|ASTM D 4833-88 |(60) |(30) |(60) |(60) | |
|kN (lb) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Mullen |1895 |1723 |2343 |1895 |NA |
|Burst |(275) |(250) |(340) |(275) | |
|ASTM D 3786-87 | | | | | |
|kPa (psi) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Trapezoid |0.22 |0.27 |0.36 |0.22 |NA |
|Tear Strength |(50) |(60) |(80) |(50) | |
|ASTM D 4533-91 | | | | | |
|kN (lb) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Grab/Tensile |0.45 X |0.42 X |0.53 X |0.45 |0.13 |
|Elongation | (100)/15| 0.36/15 | 0.53/ | (100)/15| (30) 15|
|ASTM D 4632-91 | |(95 X |15 X 20 | | |
|kN (lb)% | | 80)/15|(120 X | | |
| | | | 120)/ | | |
| | | |15 X 20 | | |
|___________________|__________|__________|___________|__________|__________|
|Wide With | | | | | |
|Tensile Elongation | | | | | |
|ASTM D 4595-86 | | | | | |
|kN/m (lb/in) | | | | | |
|MD |NP |NP |NP |NP |NP |
|XD |NP |NP |NP |NP |NP |
|___________________|__________|__________|___________|__________|__________|
|Manufacturer's |S/F |S/F |S/F |S/F |barrier |
|Suggested | | | | |fence |
|Applications | | | | | |
|___________________|__________|__________|___________|__________|__________|
W =Woven D =Drainage
NW =Nonwoven P =Protection
O/C =Other or combination E =Erosion Control
Pet =Polyester A/O =Asphalt Overlay
PP =Polypropylene S/F =Silt Fence
PE =Polythylene NA =Manufacturer determined that
S/S =Separation/stabilization this data was not appilicable
R =Reinforcement to the product or the data was
F =Filtration unavailable
NP =Data not provided by manufacturer
___________________________________________________________________________
|Property |Amoco 4504|Amoco 4506|Amoco 4508 |Amoco 4510|Amoco 4512|
|___________________|__________|__________|___________|__________|__________|
|Mass Per Unit |NA |NA |NA |NA |NA |
|g/m2 (oz/yd2) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Structure |NW |NW |NW |NW |NW |
|___________________|__________|__________|___________|__________|__________|
|Polymer |PP |PP |PP |PP |PP |
|Composition | | | | | |
|___________________|__________|__________|___________|__________|__________|
|% Open Area |NA |NA |NA |NA |NA |
|CWO-22125 | | | | | |
|___________________|__________|__________|___________|__________|__________|
|AOS |0.212 |0.212 |0.150 |0.150 |0.150 |
|ASTM D4491-87 |(70) |(700) |(100) |(100) |(100) |
|mm (U.S. Seive) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Permittivity |2.0/4064 |1.7/3657 |1.5/3251 |1.1/2544 |0.9/2438 |
|ASTM D4491-92 |(100) |(90) |(80) |(70) |(600 |
|sec-1/Flow Rate | | | | | |
|l/min/m2 | | | | | |
|(gal/min/ft2) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Puncture |0.245 |0.401 |0.579 |0.734 |0.823 |
|ASTM D 4833-88 |(55) |(90) |(130) |(165) |(185) |
|kN (lb) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Mullen |1550 |2412 |3101 |3790 |4479 |
|Burst |(225) |(350) |(450) |(550) |(650) |
|ASTM D 3786-87 | | | | | |
|kPa (psi) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Trapezoid |0.16 |0.29 |0.36 |0.42 |0.51 |
|Tear Strength |(35) |(65) |(80) |(95) |(115) |
|ASTM D 4533-91 | | | | | |
|kN (lb) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Grab/Tensile |0.42 |0.67 |0.89 |1.05 |1.22 |
|Elongation | (95)/15| (150)/50| (200)/50 | (235)/50 | (275)/50|
|ASTM D 4632-91 | | | | | |
|kN (lb)% | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Wide With | | | | | |
|Tensile Elongation | | | | | |
|ASTM D 4595-86 | | | | | |
|kN/m (lb/in) | | | | | |
|MD |NP |NP |NP |NP |NP |
|XD |NP |NP |NP |NP |NP |
|___________________|__________|__________|___________|__________|__________|
|Manufacturer's |F |F |F |F |F |
|Suggested |(landfill)|(landfill)|(landfill) |(landfill)|(landfill)|
|Applications | | | | |P |
| | | | | |(geo- |
| | | | | | membrane)|
|___________________|__________|__________|___________|__________|__________|
W =Woven D =Drainage
NW =Nonwoven P =Protection
O/C =Other or combination E =Erosion Control
Pet =Polyester A/O =Asphalt Overlay
PP =Polypropylene S/F =Silt Fence
PE =Polythylene NA =Manufacturer determined that
S/S =Separation/stabilization this data was not appilicable
R =Reinforcement to the product or the data was
F =Filtration unavailable
NP =Data not provided by manufacturer
___________________________________________________________________________
|Property |Amoco 4516|Amoco 4535|Amoco 4545 |Amoco 4546|Amoco 4547|
|___________________|__________|__________|___________|__________|__________|
|Mass Per Unit |NA |NA |NA |NA |NA |
|g/m2 (oz/yd2) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Structure |NW |NW |NW |NW |NW |
|___________________|__________|__________|___________|__________|__________|
|Polymer |PP |PP |PP |PP |PP |
|Composition | | | | | |
|___________________|__________|__________|___________|__________|__________|
|% Open Area |NA |NA |NA |NA |NA |
|CWO-22125 | | | | | |
|___________________|__________|__________|___________|__________|__________|
|AOS |0.150 |0.212 |0.212 |0.212 |0.212 |
|ASTM D4491-87 |(100) |(70) |(70) |(70) |(70) |
|mm (U.S. Seive) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Permittivity |0.7/2032 |2.2/6298 |2.1/6095 |2.0/5689 |1.8/4876 |
|ASTM D4491-92 |(50) |(155) |(150) |(140) |(120) |
|sec-1/Flow Rate | | | | | |
|l/min/m2 | | | | | |
|(gal/min/ft2) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Puncture |0.979 |0.200 |0.245 |0.299 |0.311 |
|ASTM D 4833-88 |(220) |(45) |(55) |(65) |(70) |
|kN (lb) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Mullen |5168 |1102 |1275 |1550 |1654 |
|Burst |(750) |(160) |(185) |(225) |(240) |
|ASTM D 3786-87 | | | | | |
|kPa (psi) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Trapezoid |0.58 |0.16 |0.18 |0.58 |0.22 |
|Tear Strength |(130) |(35) |(40) |(130) |(50) |
|ASTM D 4533-91 | | | | | |
|kN (lb) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Grab/Tensile |1.56 |0.36 |0.40 |0.45 |0.53 |
|Elongation | (350)/50| (80)/50 | (90)/50 | (100)/50| (120)/50|
|ASTM D 4632-91 | | | | | |
|kN (lb)% | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Wide With | | | | | |
|Tensile Elongation | | | | | |
|ASTM D 4595-86 | | | | | |
|kN/m (lb/in) | | | | | |
|MD |NP |NP |NP |NP |NP |
|XD |NP |NP |NP |NP |NP |
|___________________|__________|__________|___________|__________|__________|
|Manufacturer's |P |F,D |F,D |F,D,S/S |F,D,S/S,E |
|Suggested |(geo- | | | | |
|Applications | membrane)| | | | |
|___________________|__________|__________|___________|__________|__________|
W =Woven D =Drainage
NW =Nonwoven P =Protection
O/C =Other or combination E =Erosion Control
Pet =Polyester A/O =Asphalt Overlay
PP =Polypropylene S/F =Silt Fence
PE =Polythylene NA =Manufacturer determined that
S/S =Separation/stabilization this data was not appilicable
R =Reinforcement to the product or the data was
F =Filtration unavailable
NP =Data not provided by manufacturer
___________________________________________________________________________
|Property |Amoco 4550|Amoco 4550|Amoco 4552 |Amoco 4553|Amoco 4555|
|___________________|__________|__________|___________|__________|__________|
|Mass Per Unit |NA |NA |NA |NA |NA |
|g/m2 (oz/yd2) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Structure |NW |NW |NW |NW |NW |
|___________________|__________|__________|___________|__________|__________|
|Polymer |PP |PP |PP |PP |PP |
|Composition | | | | | |
|___________________|__________|__________|___________|__________|__________|
|% Open Area |NA |NA |NA |NA |NA |
|CWO-22125 | | | | | |
|___________________|__________|__________|___________|__________|__________|
|AOS |0.212 |0.150 |0.150 |0.150 |0.150 |
|ASTM D4491-87 |(70) |(100) |(100) |(100) |(100) |
|mm (U.S. Seive) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Permittivity |1.7/4673 |1.6/4470 |1.5/4297 |1.4/3251 |1.3/2844 |
|ASTM D4491-92 |(115) |(110) |(105) |(80) |(70) |
|sec-1/Flow Rate | | | | | |
|l/min/m2 | | | | | |
|(gal/min/ft2) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Puncture |0.336 |0.401 |0.467 |0.579 |0.668 |
|ASTM D 4833-88 |(75) |(90) |(105) |(130) |(150) |
|kN (lb) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Mullen |1826 |2170 |2412 |2756 |3445 |
|Burst |(265) |(315) |(350) |(400) |(500) |
|ASTM D 3786-87 | | | | | |
|kPa (psi) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Trapezoid |0.25 |0.29 |0.31 |0.36 |0.42 |
|Tear Strength |(55) |(65) |(70) |(80) |(95) |
|ASTM D 4533-91 | | | | | |
|kN (lb) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Grab/Tensile |0.58 |0.67 |0.80 |0.089 |1.20 |
|Elongation | (130)/50 | (150)/50 | (180)/50 | (200)/50 | (270)/50|
|ASTM D 4632-91 | | | | | |
|kN (lb)% | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Wide With | | | | | |
|Tensile Elongation | | | | | |
|ASTM D 4595-86 | | | | | |
|kN/m (lb/in) | | | | | |
|MD |NP |NP |NP |NP |NP |
|XD |NP |NP |NP |NP |NP |
|___________________|__________|__________|___________|__________|__________|
|Manufacturer's |F,D,S/S,E |F,D,S/S,E |F,D,S/S,E |F,D,S/S,E |F,D,S/S,E |
|Suggested | | | | | |
|Applications | | | | | |
|___________________|__________|__________|___________|__________|__________|
W =Woven D =Drainage
NW =Nonwoven P =Protection
O/C =Other or combination E =Erosion Control
Pet =Polyester A/O =Asphalt Overlay
PP =Polypropylene S/F =Silt Fence
PE =Polythylene NA =Manufacturer determined that
S/S =Separation/stabilization this data was not appilicable
R =Reinforcement to the product or the data was
F =Filtration unavailable
NP =Data not provided by manufacturer
___________________________________________________________________________
|Property |Amoco 4557|Amoco 4561|Petrotac |Pro-Guard |Petromat |
| | | |4591 |459 |4596 |
|___________________|__________|__________|___________|__________|__________|
|Mass Per Unit |NA |NA |NA |NA |NA |
|g/m2 (oz/yd2) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Structure |NW |NW |NW |NW |NW |
|___________________|__________|__________|___________|__________|__________|
|Polymer |PP |PP |PP |PP |PP |
|Composition | | | | | |
|___________________|__________|__________|___________|__________|__________|
|% Open Area |NA |NA |NA |NA |NA |
|CWO-22125 | | | | | |
|___________________|__________|__________|___________|__________|__________|
|AOS |0.150 |0.150 |NA |NA |NA |
|ASTM D4491-87 |(100) |(100) | | | |
|mm (U.S. Seive) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Permittivity |1.1/2438 |0.7/2032 |NA |NA |NA |
|ASTM D4491-92 |(60) |(50) | | | |
|sec-1/Flow Rate | | | | | |
|l/min/m2 | | | | | |
|(gal/min/ft2) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Puncture |0.779 |1.024 |0.089(200) |NA |NA |
|ASTM D 4833-88 |(175) |(230) |ASTM E 154 | | |
|kN (lb) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Mullen |4134 |5168 |NA |NA |1137 |
|Burst |(600) |(750) | | |(165) |
|ASTM D 3786-87 | | | | | |
|kPa (psi) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Trapezoid |0.51 |0.58 |NA |NA |NA |
|Tear Strength |(115) |(130) | | | |
|ASTM D 4533-91 | | | | | |
|kN (lb) | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Grab/Tensile |1.22 |1.45 |0.89 |NA |0.35 |
|Elongation | (275)/50 | (325)/50 | (200)/NA | | (80)/50 |
|ASTM D 4632-91 | | | | | |
|kN (lb)% | | | | | |
|___________________|__________|__________|___________|__________|__________|
|Wide With | | | | | |
|Tensile Elongation | | | | | |
|ASTM D 4595-86 | | | | | |
|kN/m (lb/in) | | | | | |
|MD |NP |NP |NP |6.47 |NP |
| | | | |(370)/100 | |
| | | | |[ASTM D | |
| | | | | 882]| |
|XD |NP |NP |NP |6.47 |NP |
| | | | |(370)/100 | |
| | | | |[ASTM D | |
| | | | | 882]| |
|___________________|__________|__________|___________|__________|__________|
|Manufacturer's |railroad |railroad |A/O, pave- |A/O, pave-|A/O |
|Suggested |stabiliz- |stabiliz- |ment crack |ment crack| |
|Applications |ation |ation |repair |repair | |
| |F,D,S/S,E |F,D,S/S,E |bridge |bridge | |
| | | |membrane |membrane | |
|___________________|__________|__________|___________|__________|__________|
W =Woven D =Drainage
NW =Nonwoven P =Protection
O/C =Other or combination E =Erosion Control
Pet =Polyester A/O =Asphalt Overlay
PP =Polypropylene S/F =Silt Fence
PE =Polythylene NA =Manufacturer determined that
S/S =Separation/stabilization this data was not appilicable
R =Reinforcement to the product or the data was
F =Filtration unavailable
NP =Data not provided by manufacturer
_____________________________________________________
|Property |Petromat |Petromat |Petromat |
| |4597 |4597 |4597 |
|___________________|__________|__________|___________|
|Mass Per Unit |NA |NA |NA |
|g/m2 (oz/yd2) | | | |
|___________________|__________|__________|___________|
|Structure |NW |NW |NW |
|___________________|__________|__________|___________|
|Polymer |PP |PP |PP |
|Composition | | | |
|___________________|__________|__________|___________|
|% Open Area |NA |NA |NA |
|CWO-22125 | | | |
|___________________|__________|__________|___________|
|AOS |NA |NA |NA |
|ASTM D4491-87 | | | |
|mm (U.S. Seive) | | | |
|___________________|__________|__________|___________|
|Permittivity |NA |NA |NA |
|ASTM D4491-92 | | | |
|sec-1/Flow Rate | | | |
|l/min/m2 | | | |
|(gal/min/ft2) | | | |
|___________________|__________|__________|___________|
|Puncture |NA |NA |NA |
|ASTM D 4833-88 | | | |
|kN (lb) | | | |
|___________________|__________|__________|___________|
|Mullen |1585 |1378 |1241 |
|Burst |(230) |(200) |(180) |
|ASTM D 3786-87 | | | |
|kPa (psi) | | | |
|___________________|__________|__________|___________|
|Trapezoid |NA |NA |NA |
|Tear Strength | | | |
|ASTM D 4533-91 | | | |
|kN (lb) | | | |
|___________________|__________|__________|___________|
|Grab/Tensile |0.53 |0.40 |0.40 |
|Elongation | (120)/50 | (90)/50 | (90)/50 |
|ASTM D 4632-91 | | | |
|kN (lb)% | | | |
|___________________|__________|__________|___________|
|Wide With | | | |
|Tensile Elongation | | | |
|ASTM D 4595-86 | | | |
|kN/m (lb/in) | | | |
|MD |NP |NP |NP |
| | | | |
|XD |NP |NP |NP |
|___________________|__________|__________|___________|
|Manufacturer's |A/O |A/O |A/O |
|Suggested | | | |
|Applications | | | |
|___________________|__________|__________|___________|
W =Woven D =Drainage
NW =Nonwoven P =Protection
O/C =Other or combination E =Erosion Control
Pet =Polyester A/O =Asphalt Overlay
PP =Polypropylene S/F =Silt Fence
PE =Polythylene NA =Manufacturer determined that
S/S =Separation/stabilization this data was not appilicable
R =Reinforcement to the product or the data was
F =Filtration unavailable
NP =Data not provided by manufacturer