National Seal Co/Fluid Systems/Columbia Geosys. Ltd - Geosynthetic Clay Liners
___________________________________________________________________________
|Product |Bentofix | Bentofix | | | |
|Name | NS | NW | | | |
|________________|___________|___________|__________|__________|__________|
|Standard Roll |4.6 x 30.5 |4.6 x 30.5 | | | |
|Width & Length |(15.2 x |(15.2 x | | | |
| m(ft) | 100) | 100) | | | |
|________________|___________|___________|__________|__________|__________|
|Avg. Roll |(1740) |(1740) | | | |
|Wt. (lbs) | | | | | |
|________________|___________|___________|__________|__________|__________|
|Bentonite Mass/ | 1.0 | 1.0 | | | |
|Unit Area | | | | | |
|Excl. of Glue Wt| | | | | |
|(if appl)lb/ft2 | | | | | |
|________________|___________|___________|__________|__________|__________|
|Permeability | -9 | -9 | | | |
|(cm/sec) |1.0 x 10 |1.0 x 10 | | | |
|ASTM D 5084 | | | | | |
|Deaired Water | | | | | |
|@ 30 psi stress | | | | | |
|________________|___________|___________|__________|__________|__________|
| Moisture | | | | | |
| Content(%) | 10 | 10 | | | |
|________________|___________|___________|__________|__________|__________|
|Swell Index | | | | | |
| (min.)ml/2g | 25 | 25 | | | |
|USP-NF-XVII | | | | | |
|________________|___________|___________|__________|__________|__________|
|Fluid Loss | | | | | |
|API-13B | NA | NA | | | |
|________________|___________|___________|__________|__________|__________|
|Upper Geosyn. | | | | | |
|Type or Struc. | woven |nonwoven | | | |
| | | | | | |
|Wt. ASTM D 3776 |3.25oz/yd2 |7.8oz/yd2 | | | |
| or Thickness | | | | | |
|ASTM D 1593 | | | | | |
|________________|___________|___________|__________|__________|__________|
|Lower Geosyn. | nonwoven | nonwoven | | | |
|Type or Struc. | | | | | |
| | | | | | |
|Wt. ASTM D 3776 |7.25oz/yd2 |7.25oz/yd2 | | | | |
|or Thickness | | | | | |
|ASTM D 1593 | | | | | |
|________________|___________|___________|__________|__________|__________|
|Tensile Strength| | | | | |
|ASTM D 4632 | 120lbs | 210lbs | | | |
|________________|___________|___________|__________|__________|__________|
| % Elongation | | | | | |
| ASTM D 463 | NP | NP | | | |
|________________|___________|___________|__________|__________|__________|