________________________________________________________________________ |Product |Gundseal |Gundseal |Gundseal |Gundseal |Gundseal | |Name |HD 20 |HD 30 | HD 40 | HD 60 | HD 80 | |________________|_________|__________|__________|__________|__________| |Standard Roll |5.33, |5.33, |5.33, |5.33, |5.33, | |Width & Length |60.96 |60.96 |60.96 |57.82 |45.72 | | m(ft) |(17.5, |(17.5, |(17.5, |(17.5, |(17.5, | | | 200) | 200) | 200) | 170) | 150) | |________________|_________|__________|__________|__________|__________| |Avg. Roll | 4150 | 4325 |4500 | 4230 | 3920 | |Wt. (lbs) | | | | | | |________________|_________|__________|__________|__________|__________| |Bentonite Mass/ |1.0 @12% |1.0 @12% |1.0 @12% |1.0 @12% |1.0 @12% | |Unit Area |Moisture |Moisture |Moisture |moisture |moisture | |Excl. of Glue Wt|content |content |content |content |content | |(if appl)lb/ft2 | | | | | | |________________|_________|__________|__________|__________|__________| |Permeability | -12| -12| -12| -12| -12| |(cm/sec) |<4 x 10 |<4 x 10 |<4 x 10 |<4 x 10 |<4 x 10 | |ASTM D 5084 | | | | | | |Deaired Water | | | | | | |________________|_________|__________|__________|__________|__________| | Moisture |10(max) |10(max) |10(max) |10(max) |10(max | | Content(%) | | | | | | |________________|_________|__________|__________|__________|__________| |Swell Index |22(min) |22(min) |22(min) |22(min) |22(min) | | (min.)ml/2g | | | | | | |USP-NF-XVII | | | | | | |________________|_________|__________|__________|__________|__________| |Fluid Loss |18(typ) |18(typ) |18(typ) |18(typ) |18(typ) | |API-13B | | | | | | |________________|_________|__________|__________|__________|__________| |Upper Geosyn. | NA | NA | NA | NA | NA | |Type or Struc. | | | | | | | | | | | | | |Wt. ASTM D 3776 | | | | | | | or Thickness | NA | NA | NA | NA | NA | |ASTM D 1593 | | | | | | |________________|_________|__________|__________|__________|__________| |Lower Geosyn. | | | | | | |Type or Struc. | HDPE | HDPE | HDPE | HDPE | HDPE | | | | | | | | |Wt. ASTM D 3776 |20 mil | 20 mil | 20 mil | 20 mil | 20 mil | | |or Thickness | | | | | | |ASTM D 751 | | | | | | |________________|_________|__________|__________|__________|__________| |Tensile Strength| 40 ppi | 63 ppi | 95 ppi | 140 ppi | 185 ppi | |ASTM D 638 |(yield) |(yield) | (yield) | (yield) | (yield) | | | 70ppi | 120 ppi | 160 ppi | 240 ppi | 320 ppi | | |(break) |(break) | (break) | (break) | (break) | |________________|_________|__________|__________|__________|__________| | % Elongation |10(yield)|13(yield) |13(yield) |13(yield) |13(yield) | | ASTM D 638 |500 |700 |700 |700 |700 | | | (break) |(break) |(break) |(break) |(break) | | | | | | | | |________________|_________|__________|__________|__________|__________| Gundle Lining System Inc. CONT Geosynthetic Clay Liners ________________________________________________________________________ |Product |Gundseal |Gundseal |Gundseal |Gundseal |Gundseal | |Name |HDT 30 |HDT 40 | HDT 60 | HDT 80 |VL 30 | |________________|_________|__________|__________|__________|__________| |Standard Roll |5.33, |5.33, |5.33, |5.33, |5.33, | |Width & Length |60.96 |60.96 |51.82 |45.72 |60.96 | | m(ft) |(17.5, |(17.5, |(17.5, |(17.5, |(17.5, | | | 200) | 200) | 170) | 150) | 200) | |________________|_________|__________|__________|__________|__________| |Avg. Roll | 4385 | 4560 | 4290 | 3980 | 4325 | |Wt. (lbs) | | | | | | |________________|_________|__________|__________|__________|__________| |Bentonite Mass/ |1.0 @12% |1.0@12% |1.0@12% |1.0@12% |1.0@12% | |Unit Area |moisture |moisture |moisture |moisture |moisture | |Excl. of Glue Wt|content |content |content |content |content | |(if appl)lb/ft2 | | | | | | |________________|_________|__________|__________|__________|__________| |Permeability | 12| 12| 12| 12| 12| |(cm/sec) |<4 x 10 |<4 x 10 |<4 x 10 |<4 x 10 |<4 x 10 | |ASTM D 5084 | | | | | | |Deaired Water | | | | | | |________________|_________|__________|__________|__________|__________| | Moisture |10(max) |10(max) |10(max) |10(max) |10(max) | | Content (%) | | | | | | |________________|_________|__________|__________|__________|__________| |Swell Index |22(min) |22(min) |22(min) |22(min) |22(min) | | (min.)ml/2g | | | | | | |USP-NF-XVII | | | | | | |________________|_________|__________|__________|__________|__________| |Fluid Loss |18(typ) |18(typ) |18(typ) |18(typ) |18(typ) | |API-13B | | | | | | |________________|_________|__________|__________|__________|__________| |Upper Geosyn. | | | | | | |Type or Struc. | NA | NA | NA | NA | NA | | | | | | | | |Wt. ASTM D 3776 | | | | | | |or Thickness | NA | NA | NA | NA | NA | |ASTM D 1593 | | | | | | |________________|_________|__________|__________|__________|__________| |Lower Geosyn. |high-dens|high-dens |high-dens |very low- |very low- | |Type or Struc. |textrd PE|textrd PE |textrd PE |density PE|density PE| | | | | | | | |Wt. ASTM D 3776 | | | | | | | |or Thickness | 30 mil | 40 mil | 60 mil | 80 mil | 30 mil | |ASTM D 751 | | | | | | |________________|_________|__________|__________|__________|__________| |Tensile Strength|63 ppi |95 ppi |140 ppi |185 ppi |95 ppi | |ASTM D 638 |(yield) |(yield) |(yield) |(yield) |(break) | | |38 ppi |50 ppi |75 ppi |100 ppi | | | |(break) |(break) |(break) |(break) | | |________________|_________|__________|__________|__________|__________| | % Elongation |13(yield)|13(yield) |13(yield) |13(yield) |900(break)| | ASTM D 638 |150(brk) |150(break)|150(break |150(break)| | |________________|_________|__________|__________|__________|__________| Gundle Lining System Inc. CONT- Geosynthetic Clay Liners ________________________________________________________________________ |Product |Gundseal |Gundseal |Gundseal |Gundseal |Gundseal | |Name |VL 40 |VL 60 | VL 80 | VLT 30 | VLT 40 | |________________|_________|__________|__________|__________|__________| |Standard Roll |5.33, |5.33, |5.33, |5.33, |5.33, | |Width & Length |60.96 |51.82 |45.72 |60.96 |60.96 | | m(ft) |(17.5, |(17.5, |(1.5, 150)|(17.5, |(17.5 | | | 200) | 170) | | 200) | 200) | |________________|_________|__________|__________|__________|__________| |Avg. Roll |4560 |4230 | 3920 |4385 | 4560 | |Wt. (lbs) | | | | | | |________________|_________|__________|__________|__________|__________| |Bentonite Mass/ |1.0 @12% |1.0 @12% |1.0 @12% |1.0 @12% |1.0 @12% | |Unit Area |moisture |moisture |moisture |moisture |moisture | |Excl. of Glue Wt|content |content |content |content |content | |(if appl)lb/ft2 | | | | | | |________________|_________|__________|__________|__________|__________| |Permeability | 12| 12| 12 | 12 | 12 | |(cm/sec) |<4 x 10 |<4 x 10 |<4 x 10 |<4 x 10 |<4 x 10 | |ASTM D 5084 | | | | | | |Deaired Water | | | | | | |________________|_________|__________|__________|__________|__________| | Moisture |10(max) |10(max) |10(max) |10(max) |10(max) | | Content(%) | | | | | | |________________|_________|__________|__________|__________|__________| |Swell Index |22(min) |22(min) |22(min) |22(min) |22(min) | | (min.)ml/2g | | | | | | |USP-NF-XVII | | | | | | |________________|_________|__________|__________|__________|__________| |Fluid Loss |18(typ) |18(typ) |18(typ) |18(typ) |18(typ) | |API-13B | | | | | | |________________|_________|__________|__________|__________|__________| |Upper Geosyn. | NA | NA | NA | NA | NA | |Type or Struc. | | | | | | | | | | | | | |Wt. ASTM D 3776 | NA | NA | NA | NA | NA | | or Thickness | | | | | | |ASTM D 1593 | | | | | | |________________|_________|__________|__________|__________|__________| |Lower Geosyn. |very low-|very low- |very low- |very low- |very low- | |Type or Struc. |dens PE |density PE|density PE|density PE|density PE| | | | | | | | |Wt. ASTM D 3776 |40 mil | 60 mil | 80 mil | 30 mil | 40 mil | | |or Thickness | | | | | | |ASTM D 751 | | | | | | |________________|_________|__________|__________|__________|__________| |Tensile Strength|126 ppi | 190 ppi | 250 ppi | 56 ppi | 84 ppi | |ASTM D 6382 |(break) |(break) |(break) |(break) | (break) | |________________|_________|__________|__________|__________|__________| | % Elongation | 900 | 900 | 900 | 400 | 400 | | ASTM D 638 |(break) | (break) | (break) |(break) | (break) | |________________|_________|__________|__________|__________|__________| Gundle Lining System Inc. CONT- Geosynthetic Clay Liners ________________________________________________________________________ |Product |Gundseal |Gundseal | | | | |Name |VLT 60 |VLT 80 | | | | |________________|_________|__________|__________|__________|__________| |Standard Roll |5.33, |5.33, | | | | |Width & Length |51.82 |45.72 | | | | | m(ft) |(17.5, |(17.5, | | | | | | 170) | 150) | | | | |________________|_________|__________|__________|__________|__________| |Avg. Roll |4290 |3980 | | | | |Wt. (lbs) | | | | | | |________________|_________|__________|__________|__________|__________| |Bentonite Mass/ |1.0 @12% |1.0 @12% | | | | |Unit Area |moisture |moisture | | | | |Excl. of Glue Wt|content |content | | | | |(if appl)lb/ft2 | | | | | | |________________|_________|__________|__________|__________|__________| |Permeability | 12| 12| | | | |(cm/sec) |<4 x 10 |<4 x 10 | | | | |ASTM D 5084 | | | | | | |Deaired Water | | | | | | |________________|_________|__________|__________|__________|__________| | Moisture |10(max) |10(max) | | | | | Content(%) | | | | | | |________________|_________|__________|__________|__________|__________| |Swell Index |22(min) |22(min) | | | | | (min.)ml/2g | | | | | | |USP-NF-XVII | | | | | | |________________|_________|__________|__________|__________|__________| |Fluid Loss |18(typ) |18(typ) | | | | |API-13B | | | | | | |________________|_________|__________|__________|__________|__________| |Upper Geosyb. | NA | NA | | | | |Type or Struc. | | | | | | | | | | | | | |Wt. ASTM D 3776 | NA | NA | | | | | or Thickness | | | | | | |ASTM D 1593 | | | | | | |________________|_________|__________|__________|__________|__________| |Lower Geosyb. |very low-|very low- | | | | |Type or Struc. |density |density | | | | | |textrd PE|textrd PE | | | | | | | | | | | |Wt. ASTM D 3776 |60 mil | 80 mil | | | | | |or Thickness | | | | | | |ASTM D 751 | | | | | | |________________|_________|__________|__________|__________|__________| |Tensile Strength|112 ppi | 169 ppi | | | | |ASTM D 638 |(break) |(break) | | | | |________________|_________|__________|__________|__________|__________| | % Elongation | 400 | 400 | | | | | ASTM D 638 |(break) | (break) | | | | |________________|_________|__________|__________|__________|__________|